【英文标准名称】:StandardPracticesforPackaging,Marking,andLoadingMethodsforSteelProductsforShipment
【原文标准名称】:装船钢制品的包装、标记和装载方法的标准实施规范
【标准号】:ASTMA700-2005
【标准状态】:现行
【国别】:
【发布日期】:2005
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.94
【标准类型】:(Practice)
【标准水平】:()
【中文主题词】:钢;运输;作标记;海船;货物运输;钢产品;金属线;薄板材;薄板材;包装件;水路运输工程;带钢;工艺
【英文主题词】:loading;marking;packaging;shipment;steelproducts
【摘要】:1.1Thesepracticescoverthepackaging,marking,andloadingofsteelproductsforshipment.Assumingproperhandlingintransit,thepracticesareintendedtodelivertheproductstotheirdestinationingoodcondition.Itisalsointendedthattheserecommendationsbeusedasguidesforattaininguniformity,simplicity,adequacy,andeconomyintheshipmentofsteelproducts.1.2Thesepracticescoversemi-finishedsteelproducts,bars,bar-sizeshapesandsheetpiling,rods,wireandwireproducts,tubularproducts,plates,sheets,andstrips,tinmillproducts,andcastings.Aglossaryofpackaging,marking,andloadingtermsisalsoincluded.1.3Thepracticesarepresentedinthefollowingsequence:1.4Thevaluesstatedininch-poundunitsaretoberegardedasstandard.ThevaluesgiveninparenthesesaremathematicalconversionstoSIunitsthatareprovidedforinformationonlyandarenotconsideredstandard.1.5Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:H40
【国际标准分类号】:55_180_40
【页数】:40P.;A4
【正文语种】:
基本信息
标准名称: | 内燃机钢质镀铬气缸套 技术条件 |
中标分类: |
机械 >>
活塞式内燃机与其他动力设备 >>
机体与运动件 |
替代情况: | 被JB/T 5082.5-2008代替 |
发布部门: | 上海内燃机研究所 |
发布日期: | 1994-07-18 |
实施日期: | 1995-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 2008-07-01 |
归口单位: | 上海内燃机研究所 |
出版日期: | 1900-01-01 |
页数: | 11 页 |
批文号: | 机械科[1994]600号 |
适用范围
本标准规定了内燃机钢质镀铬气缸套的术语、技术要求、检验规则、检验方法、标志、包装、运输与贮存。 本标准适用于气缸直径小于或等于130mm的往复式内燃机钢质镀铬气缸套。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 活塞式内燃机与其他动力设备 机体与运动件